ICT V6E DIP Switch Settings (USD, MDB)
DIP switch settings for the ICT V6E bill acceptor configured for US dollars with the MDB interface (part number SWEUUS40200-R).
How to read these tables. ★ marks the manufacturer setting. A dash means that switch is not used by that setting — leave it where it is. A unit shipped from the factory has all switches OFF.
Power-cycle the acceptor after changing any switch. Settings are only read at startup.
Main DIP switch settings (8-switch DIP + 4-switch DIP)
↔ Swipe the table sideways to see every switch column.
| Function / Setting | 8-switch DIP | 4-switch DIP | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SW1 | SW2 | SW3 | SW4 | SW5 | SW6 | SW7 | SW8 | SW1 | SW2 | SW3 | SW4 | |
| Reject US$ 1 | ON | – | – | – | – | – | – | – | – | – | – | – |
| ★ Accept US$ 1 | OFF | – | – | – | – | – | – | – | – | – | – | – |
| Reject US$ 5 | – | ON | – | – | – | – | – | – | – | – | – | – |
| ★ Accept US$ 5 | – | OFF | – | – | – | – | – | – | – | – | – | – |
| Reject US$ 10 | – | – | ON | – | – | – | – | – | – | – | – | – |
| ★ Accept US$ 10 | – | – | OFF | – | – | – | – | – | – | – | – | – |
| Reject US$ 20 | – | – | – | ON | – | – | – | – | – | – | – | – |
| ★ Accept US$ 20 | – | – | – | OFF | – | – | – | – | – | – | – | – |
| Reserved | – | – | – | – | ON | – | – | – | – | – | – | – |
| ★ Reserved | – | – | – | – | OFF | – | – | – | – | – | – | – |
| High Acceptance | – | – | – | – | – | ON | – | – | – | – | – | – |
| ★ High Security | – | – | – | – | – | OFF | – | – | – | – | – | – |
| Reserved | – | – | – | – | – | – | ON | – | – | – | – | – |
| ★ Reserved | – | – | – | – | – | – | OFF | – | – | – | – | – |
| Reserved | – | – | – | – | – | – | – | ON | – | – | – | – |
| ★ Reserved | – | – | – | – | – | – | – | OFF | – | – | – | – |
| Reserved | – | – | – | – | – | – | – | – | ON | – | – | – |
| ★ Reserved | – | – | – | – | – | – | – | – | OFF | – | – | – |
| Reserved | – | – | – | – | – | – | – | – | – | ON | – | – |
| ★ Reserved | – | – | – | – | – | – | – | – | – | OFF | – | – |
| Reserved | – | – | – | – | – | – | – | – | – | – | ON | – |
| ★ Reserved | – | – | – | – | – | – | – | – | – | – | OFF | – |
| Reserved | – | – | – | – | – | – | – | – | – | – | – | ON |
| ★ Reserved | – | – | – | – | – | – | – | – | – | – | – | OFF |
Interface settings — MDB
↔ Swipe the table sideways to see every switch column.
| Function / Setting | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Reserved | ON | – | – | – |
| ★ Reserved | OFF | – | – | – |
| Reserved | – | ON | – | – |
| ★ MDB Interface | – | OFF | – | – |
| Reserved | – | – | ON | – |
| ★ Reserved | – | – | OFF | – |
| Reserved | – | – | – | ON |
| ★ Reserved | – | – | – | OFF |
Currency assign data (bill value channels)
| Bill value | MDB |
|---|---|
| BV1 | US$ 1 |
| BV2 | US$ 5 |
| BV3 | US$ 10 |
| BV4 | US$ 20 |
- ★ Manufacture setting
- ◇ Default setting(Factory configuration has all switches in the OFF position.)
- Note : (1) Reset the bill acceptor after setting the dip switch.
Not sure which unit you have?
Denomination sets and interfaces vary by configuration part number, printed on the label on the side of the acceptor. Send us a photo of that label and we will confirm the exact model, firmware and correct switch settings — contact BillAcceptors.us.